This a blog of my Yr 9 wood tech practical work.
Saturday 18 June 2011
Week 7
This week I did not do much. All I did was start to cut up the pieces for the draw. Next week I will be putting my draw together.
Week 5-6
This week I cut the two middle pieces, which will go in the housing joints I created earlier, to the correct sizes. And glued it all together. I also glued a piece along the spice rack, to prevent the spices, or what ever is going to be on there. from falling off. My kitchen rack now looks like this.
Sunday 5 June 2011
Week 4
This week I measured out and cut the housing joint into my two side pieces.
Tools:
- tri square
- tenon saw
- chisel
- mallet
Tools:
- tri square
- tenon saw
- chisel
- mallet
Week 3
This week, after i cut out my design into the two side pieces, I sanded the both off so they are now exactly the same size and design.
Tools:
- oscillating sander
I also drilled the holes for the turned piece using a 25mm spade bit (making sure they lined up exactly).
Tools:
- oscillating sander
I also drilled the holes for the turned piece using a 25mm spade bit (making sure they lined up exactly).
Subscribe to:
Posts (Atom)